Saca el agua del altavoz de tu móvil.
Un tono de baja frecuencia diseñado para hacer vibrar el altavoz y ayudar a desplazar pequeñas gotas atrapadas. Un toque, 60 segundos.
Expulsar agua● Listo
0%Sube el volumen, orienta el altavoz hacia abajo y reproduce el tono.
Tres pasos. Sin descargas.
Designed around the thing you need right now: getting your speaker sounding clear again.
1
Sube el volumen
Raise media volume to a comfortable high level and disconnect headphones.
2
Altavoz hacia abajo
Hold the affected speaker downward over a dry towel.
3
Reproduce el tono
Play for up to 60 seconds. Stop if the speaker behaves abnormally.
Elige el problema
Jump straight to the right guide.
Guías para dispositivos
Preguntas frecuentes
What frequency does the tool use?
The demo uses a 165 Hz sine tone. Results vary by device and by the cause of the audio problem.
Will this repair a damaged speaker?
No. A cleaning tone cannot repair corrosion, torn components or other hardware damage.
Should I use heat?
Avoid concentrated heat. Let the device dry naturally and follow the manufacturer's guidance.